0item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Detail & Paint Correction

Enhancement Detail

This is the entry level into detailing and protecting your vehicle. The process for preparation is the same as the higher levels of paint correction and detailing. The preparation stage is that the vehicle has full deep clean to remove any contamination on the vehicle. The vehicle is then protected with high quality wax or sealants.
1.    Wheels cleaned using non acidic alloy wheel cleaner and arches cleaned
2.    Vehicle is rinsed down and then snow foamed
3.    PH neutral shampoo used to wash vehicle with 2 bucket system
4.    Tar remover and iron remover applied
5.    Clay bar vehicle including glass and door shuts
6.    Vehicle snow foamed and then rinsed
7.    Vehicle is dried using drying towels
8.    Vehicle wiped down with panel wipe
9.    Polish paintwork to enhance the paint (finishing polish is used)
10.    Wax or sealant applied (upgrades available at extra cost to Siramik Sc15, Siramik APT or Siramik Wax, Zymol)
11.    Door shuts waxed
12.    Interior is vacuumed and plastics dressed
13.    Glass cleaned inside and outside
14.    Tyres dressed
15.    Exterior plastics dressed
16.    Stainless steel/chrome cleaned and polished
17.    Finally inspect to make sure car meets our high standards Prices from £260

Enhancement Detail Single Stage

This single stage detail will remove light swirls marks, light imperfections and add gloss and clarity to your paint. Wax or nano sealant is applied. An upgrade to Siramik Sc15 or APT system can be applied for an additional cost.
1.    Wheels cleaned using non-acidic alloy wheel cleaner, arches cleaned
2.    Vehicle rinsed and snow foamed
3.    Ph Neutral Shampoo used with 2 bucket wash system
4.    Vehicle de-tarred, iron removed and clay bared
5.    Vehicle snow foamed and rinsed
6.    Vehicle wiped down with panel wipe
7.    Paint readings taken
8.    Single Stage machine polish and check correction with light sources
9.    Panel wipe to remove polishing oils
10.    Wax  or sealant applied
11.    Door shuts waxed
12.    Wheel wax applied
13.    Glass cleaned inside and outside
14.    Tyres dressed
15.    Exterior plastics dressed
16.    Stainless steel/chrome cleaned and polished
17.    Siramik SC Mist applied
18.    Finally inspect to make sure meets our high standards Prices from £320 (Upgrade to Siramik Sc15 for additional £75 or enquire about Siramik APT)

Enhancement 2 stage Detail

The 2 stage detail consists of the 1stage of being the compounding stage. This removes a majority of the defects and the second part of the polishing stage will be to achieve gloss and remove any marks left by the previous stage.
1.    Wheels cleaned using non-acidic alloy wheel cleaner, arches cleaned
2.    Vehicle rinsed and snow foamed
3.    Ph Neutral Shampoo used with 2 bucket wash system
4.    Vehicle de-tarred, iron removed and clay bared
5.    Vehicle snow foamed and rinsed
6.    Vehicle wiped down with panel wipe
7.    Paint readings taken
8.    2 Stage machine polish, check correction with light sources
9.    Panel wipe to remove polishing oils
10.    Wax  or sealant applied
11.    Door shuts waxed
12.    Wheel wax applied
13.    Glass cleaned inside and outside
14.    Tyres dressed
15.    Exterior plastics dressed
16.    Stainless steel/chrome cleaned and polished
17.    Siramik SC Mist applied
18.    Finally inspect to make sure meets our high standards (Upgrade to Siramik Sc15 for additional £75 or enquire about Siramik APT). 2 Stage detail prices start from £550

3 Stage Correction

The 3 stage correction detail is designed for vehicles which have heavy defects in the paint such as heavy swirls marks, deep scratches.
1.    Wheels cleaned using non-acidic alloy wheel cleaner, arches cleaned
2.    Vehicle rinsed and snow foamed
3.    Ph Neutral Shampoo used with 2 bucket wash system
4.    Vehicle de-tarred, iron removed and clay bared
5.    Vehicle snow foamed and rinsed
6.    Vehicle wiped down with panel wipe
7.    Paint readings taken
8.    3 Stage machine polish, check correction with light sources
9.    Panel wipe to remove polishing oils
10.  2 layers of Wax (Zymol/Siramik)  or Sc15
11.  Door shuts waxed
12.  Wheel wax applied
13.  Glass cleaned inside and outside
14.  Tyres dressed
15.  Exterior plastics dressed
16.  Stainless steel/chrome cleaned and polished
17.  Interior dusted and vacuumed
18.  Leather Seats fed and conditioned
19.  Siramik SC Q applied
20.  Finally inspect to make sure meets our high standards Prices from £750 (Upgrade to Siramik APT with Diamas, price starts from £450)

Multi Stage Correction

The multi stage correction detail consists of multiple polishing stages in order to achieve an outstanding finish on the paint. This is dependent on the thickness of the paint.
1.    Wheels cleaned using non-acidic alloy wheel cleaner, arches cleaned
2.    Engine bay cleaned
3.    Vehicle rinsed and snow famed
4.    Ph Neutral Shampoo used with 2 bucket wash system
5.    Vehicle de-tarred, iron removed and clay bared
6.    Vehicle snow foamed and rinsed
7.    Vehicle wiped down with panel wipe
8.    Paint readings taken
9.    Multi stage machine polish, check correction with light sources
10.    Panel wipe to remove polishing oils
11.     2 layers of Wax (Zymol/Siramik)  or Sc15
12.    Door shuts waxed
13.    Wheel wax applied
14.    Glass cleaned inside and outside
15.    Tyres dressed
16.    Exterior plastics dressed
17.    Stainless steel/chrome cleaned and polished
18.    Interior dusted and vacuumed
19.    Interior carpets shampooed and steamed
20.    Interior steam cleaned
21.    Air con sanitized
22.    Deodorise Interior  
23.    Leather Seats fed and conditioned
24.    Siramik SC Q applied
25.    Finally inspect to make sure meets our high standards Prices from £900 (Upgrade to Siramik APT with Diamas, prices start from £450)